Formnext 2026

New Toolchanger and Multi-Material Printers at Formnext 2026

New Toolchanger and Multi-Material Printers at Formnext 2026
Thomas Admin15 min read
Formnext 2026toolchangermulticolor 3D printingBambu Lab H3CCreality K3Snapmaker U1
0 views

Short answer: Formnext 2026 (17 to 20 November, Frankfurt) brought four printers with four or more independent tools to the consumer end of the show: the Creality K3 with four nozzles, the Elegoo Centauri X Ultra with four printheads, the AXILOOP MC8 with eight toolheads and the Bambu Lab H3C with nine. QIDI added the Q3D, a cheaper dual-nozzle printer, and Phaetus showed its Liber high-flow hotend for the Snapmaker U1 next to a teased toolhead system called Hydra. The U1 is not new, and it stays my multicolour and affordable toolchanger pick, with the Bambu Lab P2S still the single-colour pick.

Updated 19 November 2026, while the show was still running. Prices and ship dates were checked on the makers' official stores and the AXILOOP Kickstarter that evening, Oslo time. This is a roundup of what the makers have published, not a hands-on review; Snapmaker sent me the U1 I use and has no say over what I write.

Four, four, eight, nine. Those are the tool counts on the new multi-tool printers at Formnext 2026, and they are not one product with four price tags.

One is a $2,499 Bambu Lab flagship. One is an $849 Creality that has either started shipping or will in early December, depending on which Creality page you read. One is a first Kickstarter from a new brand, and one has no official price or date at all.

This roundup sorts them by what you can do today: order, pledge, or wait. It also says where the printer I keep recommending, the Snapmaker U1, fits now that it has company.

What launched at Formnext, and what was only on show

Two of the new printers were on sale before the doors opened on 17 November. One is a crowdfunding campaign, and one was already on my bench.

MachineToolsStatus at Formnext 2026
Bambu Lab H3C9 PrintToolsLaunched 3 November 2026, then shown in Hall 12.1 (Booth G01)
Creality K34 nozzlesPre-orders opened 13 October 2026; on the Creality stand
Elegoo Centauri X Ultra4 printheadsFirst look at the show (Booth 12.0-C02); no price or date
AXILOOP MC8 and MC8 Pro8 toolheadsGlobal debut (Hall 12, Booth G61) after Formnext Asia Shenzhen; Kickstarter live since 12 November
QIDI Q3D2 nozzlesLaunched at the show; presale on QIDI's US store
Snapmaker U14 toolheadsExisting printer, shown with its 2026 accessories (Hall 12.1, Booth F31)
Phaetus LiberU1 hotendAnnounced 22 September 2026; on the Phaetus stand (Hall 12.1, Booth C11)
Phaetus HydraNot publishedTeased 13 November; on the stand; no spec sheet

So the honest headline is narrower than "new at Formnext". Frankfurt was the first big public outing for the H3C and the K3, not their launch. The Centauri X Ultra and the Q3D made their debut at the show, and the MC8 its global one after Shenzhen.

Four new toolchangers, four different bets

Every machine in this section keeps each filament in its own heated path, so a colour change is a swap rather than a purge. That is where the family resemblance ends.

Bambu Lab H3C: nine tools, already priced

Bambu Lab's US store lists the H3C at $2,499, with an estimated ship date around 11 December 2026. Bambu presents it as its first third-generation printer, built around a system it calls Swaptek: nine PrintTools, each with its own filament path and heater, and a built-in AMS 3H for storing and drying spools.

The build volume is 330 × 320 × 325 mm, the nozzles go to 350°C and the chamber heats to 65°C. It takes 1.75 mm and 2.85 mm filament, and Bambu's tool-change and purge numbers are internal tests (note 1).

It is a flagship, priced like one. It does not replace the U1 as the affordable toolchanger, or the P2S as the single-colour pick, and my Bambu Lab H3C breakdown goes through why. For Bambu's single-nozzle line, the Bambu Lab printer comparison and my alternatives to the X1 Carbon still apply.

Creality K3: four nozzles, two ship dates

The K3 is Creality's KliTek four-nozzle printer. The official US store lists it at $849, and on 19 November it still said "Estimated Shipping Date Early December."

Creality's own press release of 3 November says something different: first US pre-order shipments began on 2 November. Both are Creality's words, and I am not going to pick one for them. Europe is "expected" in December 2026, according to the same release.

The spec table gives a 260 × 260 × 260 mm build volume, a 300°C nozzle, a 100°C bed and up to 500 mm/s. Creality lists a 5-second nozzle change and a 15-second material change (note 2). Until 30 November, the release adds four free rolls of Hyper PLA and free shipping on Creality's official store.

The K3 is the closest new rival to the U1 on price and tool count, so it gets its own page: Snapmaker U1 vs Creality K3.

Elegoo Centauri X Ultra: four heads, no price

Elegoo's official Formnext release confirms four independent printheads, multicolour and multi-material printing, quick printhead switching to cut waste, and support for rigid and flexible materials. It gives no price and no launch date.

The rest comes from journalists who saw it. All3DP, which had a first-hand look on 18 November, reports a 256 × 256 × 256 mm build volume, a fully enclosed frame, integrated filament drying and a 350°C hotend. All3DP's expectation is that it lands in the first quarter of 2027, with pricing "yet to be fixed".

3druck adds a head change of about 5 seconds and an AFS add-on that it says handles up to 20 colours, at which point the no-purge advantage no longer applies. Those are reported figures, not Elegoo's published specs. Treat the Centauri X Ultra as a preview until Elegoo names a price.

AXILOOP MC8: eight heads, on Kickstarter

AXILOOP is a new brand, and the MC8 is its first Kickstarter. The press release describes eight independent toolheads, a 300 × 300 × 300 mm build volume and a tool change "as little as four seconds" with pre-heated heads (note 3).

On 19 November the Super Early Bird reward was US$1,099 for the MC8 and US$1,499 for the enclosed MC8 Pro. The campaign gives stated retail prices of US$1,499 and US$1,999. It closes on 27 December 2026, and Kickstarter's estimated delivery is March 2027.

That evening it showed about 444 backers and about US$664,899 pledged, against a goal of about US$49,994. A funded campaign is not a shipped printer. A March 2027 estimate from a first-time crowdfunder is an estimate, so back it as a pledge, not as an order.

The dual-nozzle option: QIDI Q3D

Not every multi-material printer at the show needed four heads. QIDI launched the Q3D with two independent nozzles, which makes it a different kind of machine from a four-plus toolchanger.

QIDI's US store lists it at $599. The presale works like this: pay a refundable $30 to secure a $100 credit, then pay a $499 balance, which comes to $529 if you use the credit as described. QIDI estimates shipping at about three months after the order and full payment.

The store page also mixes "In stock" and "Backordered" wording into the same listing as the presale terms. I would go by the presale terms and assume nothing ships soon.

3D Printing Industry, citing the launch and the store, reports a 350°C quick-release main nozzle, a chamber that heats to 70°C and a build volume of 260 × 260 × 260 mm with the main nozzle. QIDI's claims about time and clog reduction are in note 4.

What Phaetus showed: Liber, and a teaser called Hydra

The most practical thing at the show for a U1 owner weighs 24 grams. Liber is a complete high-flow hotend made by Phaetus with Snapmaker, and it fits only the U1.

Phaetus rates it at 55 mm³/s, up to 300°C, with a 0.4 mm hardened-steel nozzle coated in DLC. Its headline lab claim is up to 87% higher flow than the U1's stock stainless hotend in a vase-mode ABS test, and Snapmaker itself says that does not mean every print finishes 87% faster (note 5).

On the evening of 19 November, Snapmaker's store listed a single Liber at $34.99 and a four-pack at $99, down from $119. Phaetus listed the four-pack at the same $99, on a page that says "In stock" and "available for sale in 2 weeks" at the same time. The full story is in Phaetus Liber for the U1, and the Hydra toolhead system.

Hydra is thinner. Phaetus calls it an automatic toolhead switching system, and its own teaser promises "1-Second Hotend Switching" and high-flow performance "Powered by Liber". There is no tool count, compatibility list, price or ship date on phaetus.com yet, so the 1-second figure is a marketing line with no published test (note 6).

Where the Snapmaker U1 sits now

Snapmaker brought no new printer to Frankfurt. The U1 is the oldest machine in this roundup, and at this month's price it is also the cheapest four-tool printer here, with a condition attached.

Snapmaker's official store listed it at $699 on a $999 list price on 19 November. The shop homepage runs that as a Black Friday window from 29 October 2026 to 14 January 2027. At $699 the U1 is $150 under the K3; at its $999 list it is $150 over.

For the price you get four toolheads, a 270 × 270 × 270 mm build volume, up to 500 mm/s, and a toolhead swap Snapmaker puts at 5 seconds (note 7). ABS and ASA need the optional Top Cover.

What it did bring was the ecosystem around the U1. 3D Printing Industry reports the Top Cover, new filaments including a Full Spectrum colour-mixing bundle, and the Snapmaker Space model library, which the company said had passed 8,000 models about two months after its September launch. The stand also collected donations for the Sanjay Mortimer Foundation.

My pick has not moved. The U1 is the multicolour and affordable toolchanger choice in my recommended 3D printers, and the toolchanger vs AMS guide explains why a swap beats a purge. Four heads also means four offsets to keep aligned, which is covered in how to calibrate a 3D printer.

Where the Bambu Lab P2S sits

If your last ten prints were all one colour, nothing in this week's news is aimed at you.

The Bambu Lab P2S without an AMS is still my single-colour pick: enclosed, fast, and ready for ABS and ASA out of the box. The H3C is a different kind of machine at a very different price, and it does not change that recommendation. The reasoning is in Snapmaker U1 vs Bambu Lab P2S.

For single-colour work, the filament you pick matters more than a ninth tool. My PLA vs PETG guide covers it, and 3D printer specifications explained covers what build volume, flow and acceleration numbers mean when you compare spec sheets.

Confirmed, preview, or Kickstarter

Some of these you can order, one you can only pledge for, and two you can only watch.

  • Order with a published ship estimate. Bambu Lab H3C (around 11 December 2026), Creality K3 (store says early December; the 3 November release says US shipping began on 2 November), the Snapmaker U1 and the Liber hotend.
  • Presale. QIDI Q3D, with shipping about three months after full payment.
  • Crowdfunding. AXILOOP MC8 and MC8 Pro, with an estimated March 2027 delivery that is not a guarantee.
  • Preview only. Elegoo Centauri X Ultra, with no official price or date.
  • Teaser only. Phaetus Hydra, with no spec sheet, price or date.

None of the swap times in this article come from a head-to-head test. Each maker measured its own machine its own way, and the notes below give the conditions where they were published. Ranking 4 seconds against 5 against 6 would be ranking marketing copy.

What to watch next

Three dates will tell you more than any booth video. Creality's European availability in December, Bambu's H3C ship estimate of around 11 December, and the MC8 campaign closing on 27 December.

After that, two missing numbers. Elegoo has not set a price for the Centauri X Ultra, and Phaetus has not published what Hydra fits or what it costs. I will update the Liber and Hydra piece when Phaetus does.

More tools also raise a design question the spec sheets skip: which filaments belong together in one part. My TinkerAtlas piece on what the toolchanger wave means for multi-material prints covers that, and the filament compatibility chart and the guide to which filaments bond in multi-material prints check any pair. For the modelling side, how to design parts for 3D printing has a section on multi-material parts.

Notes on the manufacturer numbers

Every timing, waste and flow figure here came from the company selling the product, unless a journalist is named. These are the conditions each one published.

  1. Bambu Lab H3C. A material switch in "as little as 6 seconds" print-to-print with Active Pre-Heat, a "3.4s Tool Change" and "0.038g Low Purge" are Bambu internal tests, and Bambu notes that actual purge varies.
  2. Creality K3. The 5-second nozzle change and 15-second material change are from Creality's store spec table. Creality also claims up to 80% shorter print times and up to 85% less waste against conventional single-nozzle multicolour workflows, in its own testing.
  3. AXILOOP MC8. The four-second tool change assumes pre-heated heads, per AXILOOP's 12 November press release.
  4. QIDI Q3D. "Nearly half" the multi-material print time, up to 90% fewer clogs and "Faster 40%" than traditional dual-colour printing are QIDI's claims, with no independent test.
  5. Phaetus Liber. The 87% figure is a Phaetus lab test: Snapmaker ABS at 280°C, bed 100°C, 24°C room, 1,000 mm/s² acceleration, single-wall spiral vase at 0.2 mm layers, enclosed, against the stock stainless hotend under the same conditions. Snapmaker's blog lists PLA at 66% and PETG HF at 43% in the same comparison.
  6. Phaetus Hydra. "1-Second Hotend Switching" is from Phaetus's 13 November teaser, with no test method or start and stop definition published.
  7. Snapmaker U1. The 5-second swap is Snapmaker's figure. Its lab tests claim up to 85% less waste than a shared-nozzle printer, and Snapmaker notes results vary with the model and settings.

FAQ

Which toolchanger printers were shown at Formnext 2026?

The new multi-tool printers at Formnext 2026 are the Creality K3 (four nozzles), the Elegoo Centauri X Ultra (four printheads), the AXILOOP MC8 (eight toolheads) and the Bambu Lab H3C (nine PrintTools). QIDI's Q3D has two independent nozzles, and the Snapmaker U1 was shown as an existing four-toolhead printer.

Is the Snapmaker U1 new at Formnext 2026?

The Snapmaker U1 is an existing printer, not a Formnext 2026 launch. Snapmaker showed it with its 2026 accessories and filaments, including the Top Cover and a colour-mixing filament bundle, and the Phaetus Liber hotend for it was on the Phaetus stand.

How much does the Bambu Lab H3C cost?

The Bambu Lab H3C is $2,499 on Bambu Lab's US store, checked on 19 November 2026, with an estimated ship date around 11 December 2026. Optional CraftTools and extra hotends for mixed nozzle sizes are sold separately.

When does the Creality K3 ship?

The Creality K3 is on order in the US at $849, and Creality gives two different shipping answers. Its 3 November 2026 press release says first US pre-order shipments began on 2 November, while the US store still listed "Estimated Shipping Date Early December" on 19 November. Creality expects European availability in December 2026.

Does the Elegoo Centauri X Ultra have a price?

The Elegoo Centauri X Ultra is unpriced: Elegoo has published no official price or launch date. Its Formnext release confirms four independent printheads, and All3DP expects it to land in the first quarter of 2027 with pricing not yet fixed.

Is the AXILOOP MC8 a safe Kickstarter to back?

The AXILOOP MC8 is an eight-toolhead printer on its brand's first Kickstarter, so no crowdfunded printer from AXILOOP has shipped yet. The campaign was far past its goal on 19 November 2026, and Kickstarter lists an estimated delivery of March 2027, which is an estimate rather than a promise.

Sources

Sources were checked on 19 November 2026.